Low-Pressure Gas Connections and Hose Selection
This black rubber hose has a listed 10 mm internal diameter. It is offered for compatible low-pressure autogas connections. Confirm the intended fuel, phase and operating limits before selecting it for a CNG or LPG installation.
This hose is not intended for high-pressure CNG cylinder lines. Use it only within the documented pressure and temperature ratings and approved installation position.
Product Specifications
Internal diameter alone does not define hose suitability. Request the complete specification for the supplied construction.
| Listed Internal Diameter | 10 mm; confirm dimensional tolerance |
|---|---|
| Outer Diameter | Request dimension and tolerance |
| Material | Rubber; request compound, lining and reinforcement details |
| Outer Color | Black |
| Fuel Compatibility | Confirm the permitted gas and fuel phase |
| Working Pressure | Request the rated range and temperature conditions |
| Operating Temperature | Request the approved range for the intended medium |
| Bend Radius | Request the specified minimum bend radius |
| Length Options | Confirm roll lengths or cut-to-length availability |
| Marking | Confirm product reference, size, rating and batch identification |
Where Can the Hose Be Used?
The approved system layout determines the installation position. Low-pressure connections may link a regulator, filter and injector rail, depending on the system design. Confirm conditions at the intended location.
Fuel and phase: Identify CNG or LPG and the required service conditions.
Pressure: Check the rated operating range and expected pressure conditions.
Temperature: Check the gas temperature and surrounding environment.
Routing: Confirm clearance from heat, moving parts and abrasive surfaces.
Connections: Use fittings and retention methods specified for the hose.
Other fluids require a separate compatibility review. Do not assume suitability for petrol, oil, coolant or industrial media because the hose is made from rubber.
The hose must match the complete installation. Read our conversion kit component guide for system context.
Will It Fit a 10mm Connection?
A nominal 10 mm hose size does not establish fitting compatibility. Confirm the fitting profile, insertion requirements and permitted retention method using the connection drawing.
Hose internal diameter and tolerance
Fitting dimensions and connection profile
Specified clamp or other retention arrangement
Required assembly and inspection procedure
Permitted movement, bend and support conditions
Cut length does not determine sealing quality. Factory-cut and site-cut lengths must both follow the approved preparation and assembly instructions. Confirm whether field cutting is permitted.
What Supports Durability and Gas Compatibility Claims?
Flexibility, aging resistance and permeability require defined specifications. Request applicable test methods and results for the supplied hose construction.
Dimensions: Internal diameter, outer diameter and tolerances.
Pressure performance: Working rating and relevant proof or burst-test conditions.
Gas compatibility: Material suitability and permeability data where applicable.
Environmental resistance: Heat, ozone, weathering or abrasion results where claimed.
Connection performance: Leakage and retention tests using the specified fittings.
Traceability: Product reference, batch and inspection date.
Test documents should identify the actual hose construction. Review our certification information and request applicable records.
Factory Processing
The workshop image provides manufacturing context. Evaluate the ordered hose using its technical specification and inspection records.
Frequently Asked Questions
Can this hose be used with both CNG and LPG?
Fuel and phase compatibility must be confirmed for the supplied construction. Request the material specification and permitted service conditions before ordering.
Can it be used between the CNG cylinder and regulator?
This listing does not cover high-pressure cylinder-line service. Select components specifically rated and documented for that circuit.
Can I order rolls or specific cut lengths?
Available lengths depend on the production and packing options. Specify required lengths, tolerances, quantities and labeling for quotation.
Does every 10mm hose use the same clamp?
The retention method depends on the hose and fitting combination. Follow the specified connection instructions rather than choosing a clamp by nominal diameter alone.
What should be inspected during service?
Follow the manufacturer's inspection schedule. Qualified personnel should check the hose, connections, supports and routing. Request replacement criteria for cracking, swelling, abrasion or other damage.
What should happen if leakage is suspected?
A suspected gas leak requires professional inspection before further gas-system use. Follow the system manufacturer's fault procedure. Do not treat tightening or trimming the hose as a substitute for diagnosis.
Request a 10mm Autogas Hose Quotation
Send the operating conditions and connection requirements. Include fuel and phase, pressure, temperature, fitting details, required length and quantity.
Confirm the supplied specification before payment. Request material and rating information, marking, packing, inspection documents, price, warranty and delivery lead time.
